The popularity of safety razors has grown in recent years and with good reason. The advantages of these razors over disposable ones are numerous. They are more environmentally friendly, give cleaner shaves, and will save you a lot in the long run. Safety razors are an excellent investment; if they are adequately cared for, they can last you for a lifetime.
If you use a safety razor, you need to take its cleaning seriously, as it may affect the razor’s effectiveness and lifespan. Safety razors can get rusty or gather debris of bacteria and dead skin cells over time. However, a simple soapy water mixture can restore shine to your razor. This article will show you how to clean and care for your safety razor. You’ll also get to know how often you should clean your safety razor.
How Often Should I Clean My Safety Razor?
If you are a safety razor user, it’s essential to know how frequently you should clean it. To avoid dirt build-up over time, it’s best to clean your safety razor often. This kind of cleaning should last for just a minute and will save you the stress of cleaning built-up debris later.
It’s best to clean your razor after every 2 or 3 uses. However, a more thorough cleaning should be done, but less frequently, to preserve the durability and finish of your razor. Contrary to many opinions, it is not necessary to disinfect your razor after every use. As long as you’re the only user of the razor, you only need to disinfect once in a while.
How to Clean a Safety Razor
There are a few ways to clean your safety razor. Your method depends on how dirty your razor is or how long ago you thoroughly cleaned it. This section highlights three ways (both frequent and infrequent) to clean your razor to ensure it stays in good shape.
With a Hand Towel (Regular Cleaning)
As stated earlier, the best way to take care of your safety razor is to clean it frequently. After every use or every other use, ensure that you clean your razor to prevent the build-up of dirt.
To do this, simply rinse the razor with warm water and use a hand towel to wipe away any residue. You can choose to dismantle it or not. This simple cleaning takes just a few seconds and will help preserve your razor’s lifespan. When you’re done wiping it, your razor is ready for the next use.
With Toothbrush and Soapy Water
You can use this method 2-3 times a month to ensure your razor is in perfect condition. For this method, first, fill a bowl or sink with warm water and add a few drops of dishwashing liquid.
Take the razor apart and let it soak in the warm soapy water for a short while. The warm water solution is usually good enough to dislodge tough debris and remove rust.
After a few minutes, remove the razor from the soapy water and use a soft cloth to wipe the razor. Focus on the areas with debris or rust. For more thorough cleaning, use a soft toothbrush to sweep through the crevices of the razor. You could also use a cotton bud for this purpose. You could also add a little toothpaste to clean the razor for deeper cleaning and shine. When you’re done cleaning the razor, set it in a cool, dry place.
Note that if your home’s running water is hard, it will leave a white film on the razor. In that case, you would need to soak the razor in a 3:1 water-vinegar solution to remove the film. Also, if you live in an area with hard water, you might need to deep cleanse your razor more often.
Boil the Safety Razor
“Boiling” your razor is another way to clean it. This method requires a lot of care, though, as it involves heating metal. For this method, you have to heat up a pot of water and drop the razor in it. It’s best to use a sieve or colander inside the pot to keep the razor from touching the base of the pot. Using a sieve or colander would ensure that the razor heats evenly and does not get damaged by the hot base.
Leave the razor in the boiling water on low heat. After 10-15 minutes, remove the razor and let it cool. Once it’s cool enough, clean it with warm, soapy water and wipe it with a cotton bud or soft toothbrush. After you’re done cleaning, wipe your razor with a clean towel.
Note that you should let the razor air cool when it leaves the boiling water. Do not try to cool it with cold water, as the sudden temperature change can damage the metal body of the razor.
More people are adopting eco-friendlier lifestyles these days. From household items to clothing and food, options are increasing daily to choose products that are safer for the planet. That’s one of the many appeals of safety razors.
Since safety razors are meant to last for a long time, it’s essential to know the best ways to clean and maintain them. Using warm soapy water is one effective way to clean your razor. To ensure the longevity of your razor, it’s best to clean it often and deep clean it as often as needed. If you observe these cleaning habits, your razor will last a long time and might even outlive you.