Skip to Content

How Often Should You Change Your Shavette Blade?

How Often Should You Change Your Shavette Blade?

We understand that Shavette makes good shaving products, and you may not want to get rid of them easily.

Over time, however, razor blades get dull and even a bit nasty, and regardless of what body part you want to remove hair from, the secret to getting a clean shave is using a sharp blade.

A dull, old blade nicks you, opens you up to possible infections, and you’ll miss out on a smooth shave. It is best to know how many shaves you can get from your Shavette blade before discarding it.

So, here’s how we can assist – we’ll help you to figure out how long you should keep your razor blades before changing them. Whether you’re shaving your beard, hair, or any other body part, this guide will help you to get a smooth shave.

How Many Shaves Do You Get With a Shavette Blade?

The question is no longer ‘can you get a good shave from Shavette?‘ Because most Shavette blade users know the answer is yes. It is one of the best ways to get a clean cut. This is because the blade is lighter, so you have more control and can get the same flawless results as a regular straight razor.

But how many shaves can you get from a Shavette blade? We understand that razor blades are expensive, and if you’re strapped for cash, you’ll want to use your razor a little longer.

Aside from that, the rule of thumb with shaving razors is to expect five to six shaves at least and 20 at most.  However, this depends on how long you shave and other factors. Here are some of the factors that determine how many shaves you can get from your Shavette razor:

Your Hair Type & Length

People with softer, thinner hair follicles typically get more use from their razor blades than those with thick, coarse air. Thick hair wears razor blade edges more quickly, so you’ll have to change the blade more often.

Hair length is another factor that impacts how long your razor will last. Shaving moderate stubble against a full beard affects the degree of wear and tear your razor will face. Longer hair can clog up your razor, requiring more swipes, and wearing the razor out. Shorter hair requires less effort and causes less trauma to your blade’s edges.

The Shaving Surface Area

The larger the surface area, the more swipes you need, and the fewer shaves you’ll get from your razor. Some common areas people tend to shave are the chin, cheeks, mustache, neck, sideburns, scalp, and soul patch.

If you shave only a few of these areas, you’ll need fewer replacements than someone shaving their entire head. However, some areas cause more damage per stroke, wearing the blade out.

For example, your chin and mustache are more coarse than the hair on your head or sideburns. So, that’s another factor to consider.

Shaving Frequency

Daily shaves result in less razor blade life. So, if you shave hair daily or more frequently, you will need to change your shaving razor more often than someone that shaves periodically. This makes sense because your shaving razor can get dull from constant use.

Blade Quality

The quality of your shaving blade further determines how many shaves you can get from your razor. High-quality metal or stainless steel can last longer than other razor blade materials. You’re better off buying your shaving razor from reputable brands. This way, you can get more shaves per blade and a cleaner, smoother cut.

Shavette, for example, is a quality shaving razor company with blades guaranteed to give you between five to ten shaves.

Beard Prep and Shaving Technique

Your shaving routine can determine how many shaves you can get out of your blade. Also, with a proper pre-shave technique like shaving cream or oil, you can soften your hair follicles.

This results in a less-laborious shaving procedure, making it easy for the blade to slice through hair, saving your blade’s lifespan.

Storage Technique

How you store your razor blades can determine how many shaves you can get out of your shaving razor. Poor storage habits can corrode your blades, ultimately leading to fewer shaves.

So, after every shave, ensure you rinse and towel dry properly, as the mix of salt and water can corrode the metal. Store your razor in a dry environment to preserve its lifespan.

How to Replace Shavette Blade

Here’s how to replace the blade on your Shavette razor:

  • First, pull back the hinge on your Shavette razor
  • Separate the two arms and pull them apart
  • Take the new razor blade out of its protective packaging and split it in half
  • Drop it on the lower metal arm of your Shavette razor
  • Please pick up the top arm, lay it over and squeeze down
  • Close the hinge, and that’s it!

How Often Should You Change Your Shavette Blade?

Reusable safety razors like the Shavette blade can lose their sharpness after constant use. Hence, a dull blade will not shave as well as it did when it was brand new, and if you shave with a dull blade, you increase your chances of getting razor bumps, cuts, or a burn.

The reason is that using a dull blade will force you to apply too much pressure and hurt yourself. Apart from harming yourself, you can get unpleasant ingrown hair and other hair-related problems that can cause skin irritation.

Many factors determine how often you need to change your Shavette blade. But it often boils down to personal preference. Even if you lose track of the number of shaves you’ve had, here are some tell-tale signs that will show you when it’s time to let that blade go:

Your Razor No Longer Glides Over Your Skin

You can tell a new razor blade from how easily it glides over your skin—the smooth feel of a sharp blade effortlessly running through hair.

However, with frequent use, your blade will start to dull, and the razor will no longer cut through hair that easily. With every shave, you will feel the blade dragging or, sometimes, tugging at the hair. That’s one way to know that it’s time to let go.

You No Longer Get a Close Shave

People love a clean, close shave for many reasons, but mostly because it leaves the skin as smooth as a baby’s. This applies even to people with the thickest and most coarse hair.

A dull blade will not give off this same effect, and you will begin to feel stubble immediately after a shave. That’s another way to know when to let that blade go.

You Start Getting Constant Ingrown Hair

Another downside of shaving with a dull blade, as we said earlier, is that it increases your chances of getting ingrown hair. This is because, as you shave with a dull razor, it irritates your skin, causing razor bumps that often result in ingrown hair.

An ingrown hair refers to hair growing into your skin after shaving or using some other hair removal technique. Once you notice frequent ingrown hairs, the first culprit may be your razor blade.

Your Razor Blade Starts to Rust

Rust is a tell-tale sign that the metal material of your shaving blade needs a replacement. Now, to debunk a common belief, using a rusty razor will not give you tetanus, even if you nick yourself.

Rust, on its own, does not cause tetanus, but the bacteria Clostridium tetani. You can only find this bacteria in organic matter like soil and dead leaves.

However, if your razor has been in a wet environment long enough to rust, bacteria could have grown on it, increasing your chances of getting an infection. Plus, using a rusty razor is plain nasty.

There’s no way around it – if you notice rust, let that razor go!

The Blade Gets Damaged

Sometimes, your reason for changing your shaving razor blade may not be something other than because it is old and worn out. If the blade gets damaged or broken, you may be at risk because you’re one shave away from getting a bad cut.

So, if you notice obvious dents, jagged ends, or some other sign of damage, let that razor go and get a replacement.


Now, you have learned how long your Shavette blade can last and how often you need to replace them. However, you can take some precautions to make your razor blade last longer.

For starters, you can trim long hair short before swiping with a blade. Then, soften your hair with shaving cream, balm, or a soft, hot towel, before shaving. Then, rinse as you use it to get rid of gunk, dead skin, and hair.

After shaving, remember to keep your razor in a cool, dry place. Following the tips in this article will guarantee a better shelf life for your favorite Shavette razor.